HOME / SESSIONS AND TALKS
Sessions and talks
Hands-on sessions on open-source tools and electronics for students and communities. Open to invitations from colleges, meetups and teams.
The flow I teach
Open-source RTL-to-GDSII on the SKY130 PDK, run hands-on in a preconfigured container so nobody spends the session installing tools.
- STEP 01
RTL and testbench
Compile Verilog with its testbench, run it with vvp and inspect the VCD waveform.
- STEP 02
Logic synthesis
Read the RTL and the Liberty library, synthesize, map to real standard cells and write a gate-level netlist.
- STEP 03
Gate-level simulation
Re-run the same testbench on the netlist to catch RTL versus synthesis mismatches, like a missing sensitivity list.
- STEP 04
Static timing analysis
Check setup and hold from the netlist, a constraint file and the library timing models.
- STEP 05
RTL to GDSII
Floorplan, placement, clock tree synthesis and routing, run step by step in interactive mode.
- STEP 06
Sign-off and layout
Layout viewing, design-rule checks and parasitic extraction in Magic, then LVS on the way to GDSII.
Analog side: Xschem and Ngspice for schematic-to-simulation (DC and transient on a CMOS inverter), and Magic for layout basics from stick diagram to layers.